The video demonstrates how to create a homemade flamethrower using a caulk gun, a can of butane, a piece of wood, and super glue. The basic idea is to attach the piece of wood to the caulk gun so that when the trigger is pressed, the butane shoots out through the nozzle. The video provides steps on how to shape the wood, attach it to the gun, and use the flamethrower. The cost for the basic version is $15, but it can be upgraded for $30 to $40.
This is my $15 flamethrower and I'm gonna show you how to make it but first let's go launch Okay, so bare minimum I went to Home Depot and all the supplies together would be $15 But if you want to make it a little bit nicer, then it's gonna cost you about 30 to 40 So this is everything you're going to need. It's right here if you want to make the nicer version, right? You're gonna need a caulk gun. You're gonna need butane and a little slab of wood. You can use whatever you want I just like using this and then some super glue So pretty much the basic idea is you have this caulk gun, right? And it perfectly fits a can of butane when you press the trigger and moves up this little plunger right here now butane Shoots out when this little nozzle on the end is compressed right highly flammable when you're shooting it up It's gas butane Upside down liquid butane. That's what we want. So we're gonna put it inside of our gun right here All I need to do is fashion something on the end. So when we press this trigger Press this trigger. It moves the can of butane up against this piece of wood and Butane comes out mine broke, but let's go ahead make a new one and I'm gonna show you how to do it So the first thing you're gonna need to get is a little thin piece of material It does not matter what it is. I have a little piece of wood from a wood-burning set now I'm gonna cut it and shape it to match this barrel Lik…
This is my $15 flamethrower and I'm gonna show you how to make it but first let's go launch Okay, so bare minimum I went to Home Depot and all the supplies together would be $15 But if you want to make it a little bit nicer, then it's gonna cost you about 30 to 40 So this is everything you're going to need. It's right here if you want to make the nicer version, right? You're gonna need a caulk gun. You're gonna need butane and a little slab of wood. You can use whatever you want I just like using this and then some super glue So pretty much the basic idea is you have this caulk gun, right? And it perfectly fits a can of butane when you press the trigger and moves up this little plunger right here now butane Shoots out when this little nozzle on the end is compressed right highly flammable when you're shooting it up It's gas butane Upside down liquid butane. That's what we want. So we're gonna put it inside of our gun right here All I need to do is fashion something on the end. So when we press this trigger Press this trigger. It moves the can of butane up against this piece of wood and Butane comes out mine broke, but let's go ahead make a new one and I'm gonna show you how to do it So the first thing you're gonna need to get is a little thin piece of material It does not matter what it is. I have a little piece of wood from a wood-burning set now I'm gonna cut it and shape it to match this barrel Like I said, it can be anything could be plastic paper as long as it's strong enough to be able to push out that thing Okay So the actual shape of your piece of wood doesn't matter as long as it fits inside of the barrel for me It does since I already had a piece of wood in there prior But you guys are just gonna cut it out and super glue it to the metal Okay to measure it out. I just took the can and put the piece of wood right here And then I pushed it forward and it made a little indent. So that's exactly how I know where to drill Now I don't want to make the hole too big because if it is too big Then this thing can push all the way through if it's small It's all you need because it can still shoot out. It doesn't need to be going actually through the hole it just needs to Just like that, okay now that's done we just need to lather super glue everywhere really and Let it dry Just opened up a fresh can so time for a cool montage To light it hold the flame It doesn't always work most of time